Skip to content

Counting stock with a phone: camera scanning, counting mode and how to keep the count honest

A stock count with a clipboard takes a day and is wrong by lunch. With a phone camera in counting mode, a team scans shelf by shelf, sees running totals and finishes before the shop opens. Here is the method, and its limits.

By Wameed field teamOnboarding and support

6 min read

In short: a phone-based stock count means:plan the zones and the freeze point,scan each item with the phone camera incontinuous counting mode (one scan per unit, with a short cooldown per code and a running count),enter codes manually when a label is damaged,review variances against system stock,recount the big differences, andpost an adjustment with a reason. Wameed’s mobile and tablet till offers a single-shot scan and a continuous counting mode, a manual-entry fallback, permission handling and a torch toggle. Camera scanning is available on phones and tablets, not on desktop or in the browser, where you use a hardware scanner. Test that scanned codes match your whole catalogue on a small sample count before you rely on it.

The best count is the one you do often, quickly, with little disruption.

Why count with a phone

ClipboardPhone
Write, then type laterScan once; the quantity is recorded
Handwriting errorsBarcode exact
One person per sheetSeveral people, several phones
Variances found next dayRunning totals while counting
A day of workHours

What the camera does

  • Single scan: open the scanner, point it at a code, and it resolves on the first valid detection (for a product lookup, a goods-receipt line, or filling a barcode field).
  • Continuous counting mode: the camera keeps scanning, adds one to the count for each detection, applies ashort cooldown per code (about 1.5 seconds) so one item is not counted twice, shows arunning count and thelast scanned item, and finishes withDone.
  • Manual entry: if a label is damaged or the camera is denied, type the code; it follows the same path as a camera detection.
  • Torch and camera flip for dark stockrooms.
  • Permission handling: if camera access is denied, the app explains and offers a shortcut to settings.

On desktop Windows and in the browser, the camera buttons are hidden; use a USB or Bluetooth scanner. Seebarcode scanner guide.

Plan the count

1. Choose the type

TypeWhen
Full countYear end, audits, after a stock problem
Cycle countWeekly or monthly, by zone or category
Spot checkA few high-value or suspicious items

For most shops, cycle counts of fast and valuable items weekly and a full count a few times a year work best. UseABC analysis to choose.

2. Freeze the movement

For the count window, stop receiving and transfers, or note them separately. If you sell during the count, record what sold so you can adjust. Best practice: count before opening or after closing.

3. Divide the shop

Zones with names (Aisle 1, Back room, Window display), one team per zone, each zone counted once, a second person checking.

4. Prepare

  • Fully charged phones, a power bank.
  • Good lighting.
  • Tidy shelves, items facing front with barcodes visible.
  • Labels on every item; print missing ones. Seebarcodes for items without a barcode.
  • A list of high-risk items for double counting.
  • Permissions for those allowed to post adjustments. Seeroles and permissions.

Count shelf by shelf

  1. Open the count for the zone.
  2. Scan each unit in counting mode; for cartons, scan the carton code and enter the number if your setup handles pack quantities.
  3. Move left to right, top to bottom so nothing is missed or repeated.
  4. Don’t count the same shelf twice without noting it.
  5. Set aside items without readable codes and enter them by hand.
  6. Mark the zone done and move on.

Tips

  • Hold the phone steady and keep the code in the frame.
  • Scan one at a time if cooldown rejects fast repeats.
  • Mind similar labels: two sizes with similar barcodes.
  • Weighed or loose goods: weigh and enter the quantity.
  • Variants: count by variant, not style. Seesize and colour variants.

Review the variances

After the count, compare counted to system stock:

VarianceAction
Small (±1–2 units, low value)Accept; adjust
Large or high valueRecount that item/zone
Items not foundSearch the stockroom, transfers, returns
Items scanned that were not in the systemCheck labels and products; add if genuine
Repeating variances on the same productInvestigate: wrong barcode, receiving errors, theft

Categorise the reason (miscount, damage, theft suspected, receiving error, unrecorded sale, unrecorded transfer). Patterns tell you where the process breaks. Seeshrinkage in Saudi retail.

Post the adjustment

  1. Confirm the counted quantity for each line.
  2. Post a stock adjustment with a reason. The system records who, when and why.
  3. Keep the count sheet (the count report) with the date and the team.
  4. Value the adjustment for finance. Seebuilt-in accounting.

Adjustments are a control point: restrict who can post them.

Limits and checks

  • Camera scanning is slower than a hardware scanner in a queue; for large stores, use handheld scanners.
  • Lighting and label quality matter.
  • Scale-printed weight labels are best scanned with a hardware scanner; test them before relying on the camera.
  • Verify matching on a sample: scan items from different categories and check each resolves to the right product. Do not assume a count screen searches the entire catalogue; confirm it does on your data.
  • Offline: counting depends on having the catalogue on the device; test with the connection off if you need that.
  • Browser and desktop: use a hardware scanner.

A 90-minute count for a small shop

MinutesTask
0–10Brief the team; assign zones; check phones
10–60Scan zone by zone
60–75Review variances; recount top differences
75–85Post adjustments with reasons
85–90Save the report; plan follow-ups

Mistakes to avoid

  • Counting while selling, without a plan.
  • Letting the person who receives stock also count it.
  • Adjusting without recounting large variances.
  • No reasons recorded.
  • Untidy shelves.
  • Not testing the camera on your own catalogue.

Frequently asked questions

Does it work on any phone?

On supported phones and tablets with a camera; test on your devices.

Can I count on a computer?

Use a hardware scanner; camera scanning is not offered on desktop or the browser.

What if a barcode is damaged?

Enter it manually; it follows the same path.

Who should post adjustments?

A manager or someone with the stock-adjustment permission.

  • #جرد المخزون بالجوال
  • #عد المخزون بالكاميرا
  • #مسح الباركود بالجوال
  • #الجرد الدوري
  • #stock count with phone
  • #camera barcode counting
  • #stocktake app

Share this article

Ask about your own shop

Thirty minutes on your products, your tax setup and your hardware — not a slide deck.

Keep reading