Skip to content

Barcode scanner for a cashier (ماسح باركود): 1D, 2D, wired, wireless and camera compared

A scanner is the cheapest speed-up a shop can buy. The wrong one misreads curved labels, cannot read a phone screen and stalls the queue. Here is how to choose between laser, imager, wired, Bluetooth and camera.

By The Wameed teamWameed POS

5 min read

In short: for most shops, buy awired USB 2D imager scanner at each till: it reads 1D barcodes, QR and DataMatrix codes, damaged labels and phone screens, and it works like a keyboard with no driver. ChooseBluetooth or 2.4 GHz wireless for large counters or roaming, ahandheld PDA with a built-in scanner for stock counts, and use thephone camera only for occasional scans. Make sure your cashier software supports your scanner type (USB keyboard-wedge, Bluetooth, serial, DataWedge or camera).

A scanner is the cheapest speed-up you can buy. Barcodes cut keying errors and make the queue move.

1D or 2D?

TypeReadsTypical useNotes
1D laserLinear barcodes (EAN-13, UPC, Code 128)Basic retailCheap; poor on damaged or screen codes
1D CCD / linear imagerLinear barcodesRetailMore robust than laser
2D imager1D plus QR, DataMatrix, PDF417Modern retail, restaurants, pharmacy, e-ticketsReads phone screens, loyalty QR, coupons; the best default

If a customer shows aQR coupon, a loyalty card or a booking confirmation on their phone, you need a 2D scanner. Laser scanners cannot read screens.

Wired, wireless or camera?

OptionStrengthsLimits
Wired USBReliable, cheap, no batteryA cable at the counter
BluetoothWireless; works with tabletsNeeds pairing and charging; range limits
2.4 GHz dongleFast and stable at the counterNeeds a USB port for the dongle
Handheld PDA (Zebra, Honeywell)Built-in scanner, screen and softwareHigher cost; for stock and floor
Camera (phone/tablet)No extra hardwareSlower; fine for occasional scans, not for a queue

On Wameed’s mobile and tablet till, camera scanning can resolve a product, add a goods-receipt line, fill a barcode in a product form, or run a continuous counting mode for stocktakes; a manual-entry fallback is always there. Camera scanning is not offered on desktop Windows or in the browser, where you use a hardware scanner.

How scanners connect

  • USB keyboard-wedge (HID): the scanner behaves like a keyboard; it “types” the code and presses Enter. No driver. The most common.
  • Bluetooth: pairs like a keyboard or an SPP serial device.
  • Serial (RS-232): older equipment.
  • DataWedge: Zebra and Honeywell handhelds send scans to the app.
  • Built-in scanners: some terminals scan through the vendor’s own service.

Ask your vendor which of these your cashier supports. Seecashier devices guide.

What to look for

  1. Scan speed and distance. A good imager reads in a fraction of a second from a few centimetres to well beyond an arm’s reach.
  2. Damaged and curved labels. Crumpled, glossy or shrink-wrapped codes defeat poor scanners.
  3. Hands-free stand mode. A scanner on a stand or a presentation scanner speeds counters with many small items.
  4. Beeper and LED feedback. Cashiers need to know a scan registered.
  5. Build quality. A scanner is dropped, so look for a drop rating and a cable that does not kink.
  6. Support for your codes. EAN-13 is standard; check any special codes, such as GS1 on pharmacy packs or scale-printed labels.
  7. Warranty and replacement.

Setup tips

  • Set the terminator to Enter (carriage return) after each scan so the cashier does not press a key.
  • Disable symbologies you do not use to prevent misreads.
  • Add prefix or suffix characters only if the software expects them.
  • Check the keyboard language. A scanner typing numbers while the keyboard layout is Arabic can produce odd characters. Use a wedge setting that sends digits correctly.
  • Test with your own labels, including the scale-printed ones.

Barcodes for items that lack one

Loose goods, local products and your own recipes do not come with a barcode. Print your own labels. Seebarcodes for items without a barcode andbarcode and label printing guide.

Stock counts with a scanner

A handheld or camera in counting mode makes a stocktake several times faster than a paper list. Seestock count how-to.

Common problems

SymptomLikely causeFix
Scans but nothing appearsFocus is in the wrong fieldClick the sale screen; check the app is in front
Types digits twiceTwo scanners or a duplicate settingCheck configuration
Reads some labels onlySymbology disabledEnable it
Slow readingDirty window or low contrastClean; print darker labels
Bluetooth dropsRange or sleep modeCharge; adjust sleep; use wired at the counter

Frequently asked questions

Which scanner should I buy for a small shop?

A wired USB 2D imager.

Can I scan with my phone?

Yes for occasional scans. For a queue, use a hardware scanner.

Can it read a QR code on a phone screen?

A 2D imager can. A basic laser scanner cannot.

Will any scanner work with Wameed?

Standard USB, Bluetooth and DataWedge scanners work; confirm your model with your vendor.

  • #ماسح باركود
  • #قارئ باركود
  • #سكانر الكاشير
  • #ماسح الباركود ثنائي الأبعاد
  • #barcode scanner
  • #POS barcode reader
  • #2D QR scanner

Share this article

Ask about your own shop

Thirty minutes on your products, your tax setup and your hardware — not a slide deck.

Keep reading