Skip to content

Cash drawer for a cashier (درج كاشير): size, voltage, printer connection and control

A drawer is a simple box with a big job: it must open only when it should. Choosing the right size, matching the printer, setting the pulse and controlling who can open it saves hours of confusion and some cash.

By The Wameed teamWameed POS

5 min read

In short: a cash drawer plugs into yourreceipt printer (usually by an RJ-11/RJ-12 cable) and opens when the software sends a pulse through the printer. Choose a drawer with theright voltage (12 V or 24 V) for your printer, enoughbill and coin compartments for your currency, akey lock, and a sturdy build. In software, restrict who can open it without a sale, set the pulse to open reliably and log every opening. A drawer is a control, not just a container.

Most till theft and many “where did the cash go?” arguments involve the drawer. Good hardware and good settings reduce both.

How a drawer connects

  1. Thecashier software decides the drawer should open (a cash sale, a “no sale” with permission, or a payout).
  2. It sends adrawer-kick command to thereceipt printer (ESC/POS).
  3. The printer sends anelectrical pulse down theRJ-11/RJ-12 cable to the drawer.
  4. Asolenoid releases the latch and the tray opens.

Because the printer fires the drawer,the printer must be on and connected, and the cashier software must send the command through it. Some drawers connect directly via USB or network; they exist but are less common.

Choosing a drawer

Size

Look at the compartments:

  • Bills: at least 4–5 slots for Saudi denominations (SAR 5, 10, 50, 100, 500), plus a place for 1s or cheques if needed.
  • Coins: 6–8 coin cups for the coins you use.
  • A cash lift or slot under the tray for large notes.

A compact drawer saves counter space, but a drawer with a tight tray makes counting slow.

Voltage

Drawers are12 V or 24 V, and the printer’s drawer port provides one of those.Match them. The wrong voltage may fail to open or damage the solenoid. Check the printer’s manual and the drawer’s label before buying.

Connection

  • RJ-11/RJ-12 to the printer is the standard.
  • USB or network drawers are possible but need software support.

Build and lock

  • Metal body with a strong latch.
  • Key lock for the manager to lock the drawer when the till is idle.
  • Removable cash tray to take the cash to the safe at closing.
  • A sensor that reports whether the drawer is open, where supported.

Where to place it

Under the counter or beside the till, not on a hallway edge, and with room for the drawer to open fully. Keep it out of customers’ sight line when open.

Setting up the software

SettingWhy
Printer assignmentThe drawer opens through a named printer
Pulse pin (2 or 5) and lengthMatches the drawer’s wiring and strength so it opens reliably
Open on cash saleAutomatic open for cash payments
No-sale openRequires a reason or permission
Minimum gap between openingsPrevents rapid repeated kicks (Wameed throttles kicks and logs them)
Log every openingWith time, user and reason

If the drawer does not open, try the other pulse pin, adjust the pulse length, and confirm the cable is in the drawer port (not the phone port).

Controls that make a drawer safe

  1. Open only for a reason: a cash sale, a refund or a payout.
  2. No-sale needs permission and a recorded reason. Seeroles and permissions.
  3. Personal login for each cashier and one drawer per cashier. Seemultiple cashiers in one branch.
  4. Counted float at open, blind count at close. Seeshift handover.
  5. Cash drops to the safe above a threshold.
  6. A camera pointing at the till and the drawer, within your privacy obligations. Seepreventing till theft.
  7. Lock the drawer when the till is unattended.
  8. Review the “drawer opened” report weekly for unusual patterns.

Cash-light and cashless

If most customers pay by card, you still need a drawer for cash and change, but with a small float. A small compact drawer or a cash box with the same controls is often enough. Seecash vs card in Saudi retail.

Common problems

SymptomLikely causeFix
Drawer does not openPrinter off, wrong port, voltage mismatchCheck power, cable, voltage
Opens only sometimesPulse too short or wrong pinIncrease pulse; try pin 5
Opens twiceDuplicate commandsCheck software settings; use a debounce
JamsTray overloaded or bent latchClear; service
Opens on printing a test pagePrinter set to kick on every printChange printer driver setting

Frequently asked questions

Can I use any drawer with any printer?

It must have the right connector and voltage. Most drawers use an RJ-11/RJ-12 cable and are 12 V or 24 V.

Does the printer have to be on?

Yes; it fires the drawer.

Can I open the drawer without a sale?

Only with permission and a reason, logged by the system.

How do I stop theft from the drawer?

Combine hardware (lock, safe) with process (blind counts, drops, permissions, logs).

  • #درج الكاشير
  • #درج نقدية
  • #درج كاشير
  • #فتح درج النقد
  • #cash drawer
  • #POS cash drawer
  • #RJ12 drawer kick

Share this article

Ask about your own shop

Thirty minutes on your products, your tax setup and your hardware — not a slide deck.

Keep reading